manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 42

Administrator’s Handbook

42

Status

Wide Area Network may be 

Waiting for DSL

 (or other waiting status), 

Up

 or 

Down

Data Rate (Kbps)

Once connected, displays DSL speed rate, Downstream and Upstream

Local Address

IP address assigned to the WAN por t.

Peer Address

The IP address of the gateway to which the connection defaults. If doing 
DHCP, this info will be acquired. If doing PPP, this info will be negotiated.

Connection Type

May be either Instant On or Always On.

NAT

On 

or 

Off

. 

ON

 if using Network Address Translation to share the IP address 

across many LAN users.

WAN Users

Displays the number of users allotted and the total number available for 
use.

LAN

IP Address

Internal IP address of the Motorola Netopia® Gateway.

Netmask

Defines the IP subnet for the LAN 
Default is 255.255.255.0 for a Class C device

DHCP Ser ver

On 

or 

Off

. 

ON

 if using DHCP to get IP addresses for your LAN client 

machines.

DHCP Leases

A “lease” is held by each LAN client that has obtained an IP address through 
DHCP.

Ethernet (or USB) 
Status

Status of your Ethernet network connection (if suppor ted). 

Up

 or 

Down

.

VoIP

Line 1/2 Registration If your Gateway is so equipped, voice Line 1 and/or 2 is either 

Idle

 or 

Reg-

istered

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands