manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 110

Administrator’s Handbook

110

The 

VLAN Entry

 page appears.

Check the 

Enable

 checkbox, and enter a descriptive name for the VLAN.

You can create up to 16 VLANs, and you can also restrict any VLAN, and the computers on it, from adminis-
tering the Gateway.

•

VLAN Name

 – A descriptive name for the VLAN.

•

Type

 – LAN or WAN Por t(s) can be enabled on the VLAN. You can choose a type designation as follows:

By-Port

: indicates that the VLAN is por t-based. Traffic sent to this por t will be treated as belonging to 

the VLAN, and will not be for warded to other por ts that are not within a common VLAN segment.

Global

 indicates that the por ts joining this VLAN are par t of a global 802.1q Ethernet VLAN. This VLAN 

includes por ts on this Router and may include por ts within other devices throughout the network. The 
VID in this case may define the behavior of traffic between all devices on the network having por ts that 
are members of this VLAN segment.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands