manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 70

Administrator’s Handbook

70

LCP Settings:

Authentication:

 Select 

Off

, 

PAP and/or CHAP

, 

PAP only

, or 

CHAP only

 from the pull-down menu. The 

settings for por t authentication on the Gateway must match the authentication expected by the remote sys-
tem. The username and passwords are available on the WAN IP Inter faces page.

MRU:

 Specifies the Maximum Receive Unit for the PPP Inter face.

Magic Number:

 Enables or disables LCP magic number negotiation.

Protocol Compression:

 Specifies whether you want the Gateway to compress the PPP Protocol field when 

it transmits datagrams over the PPP link.

LCP Echo Requests:

 Specifies whether you want your Gateway to send LCP echo requests. You should 

turn off LCP echoing if you do not want the Gateway to drop a PPP link to a nonresponsive peer. 

Max Failures:

 Specifies the maximum number of Configure-NAK messages the PPP module can send with-

out having sent a Configure-ACK message.

Max Configures:

 Specifies the maximum number of unacknowledged configuration requests that your 

Gateway will send.

Max Terminates:

 Specifies the maximum number of unacknowledged termination requests that your Gate-

way will send before terminating the PPP link.

Restart Timer:

 The number of seconds the Gateway should wait before retransmitting a configuration or 

termination request.

Click the 

Submit

 button when you are finished.

Ethernet WAN interface

Click the 

Ethernet WAN

 link to configure it.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands