manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 343

343

CHAPTER 8

Technical Specifications and Safety 
Information

Description

Dimensions: 

Smart Modems:

 13.5 cm (w) x 13.5 cm (d) x 3.5 cm (h); 5.25” (w) x 5.25” (d) x 1.375” (h)

Wireless Models:

 19.5 cm (w) x 17.0 cm (d) x 4.0 cm (h); 7.6” (w) x 6.75” (d) x 1.5” (h)

3342/3342N/3352/3352N:

 8.5 cm (w) x 4.5 cm (d) x 2 cm (h); 3.375” (w) x 1.75” (d) x .875” (h)

2200-Series Modems

: 1.06"(2.69 cm) H, 4.36" (11.07 cm) W, 5.71"(14.50 cm) L

2200-Series Wireless Models

: 1.2"(3.0cm) H, 8.7" (22.0 cm) W, 5.2"(13.2cm) L

Communications interfaces: 

The Motorola Netopia® Gateways have an RJ-11 jack for DSL line connections or an 

RJ-45 jack for cable/DSL modem connections and 1 or 4–por t 10/100Base-T Ethernet switch for your LAN 
connections. Some models have a USB por t that can be used to connect to your PC; in some cases, the USB por t also 
ser ves as the power source. Some models contain an 802.11b or 802.11g wireless LAN transmitter.

Power requirements

■

12 VDC input

■

USB-powered models only:

 For Use with Listed I.T.E. Only

Environment

Operating temperature: 

0° to +40° C

Storage temperature: 

0° to +70° C

Relative storage humidity: 

20 to 80% noncondensing

Software and protocols

Software media: 

Software preloaded on internal flash memor y; field upgrades done via download to internal flash 

memor y via TFTP or web upload. (does not apply to 3342/3352)

Routing: 

TCP/IP Internet Protocol Suite, RIP

WAN support: 

PPPoA, PPPoE, DHCP, static IP address

Security: 

PAP, CHAP, UI password security, IPsec, SSL cer tificate

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands