Motorola Netopia 7000, Administrator'S Handbook

Page: 171 / 368

171
Working with IP Filters and Filter Sets
To work with filters and filter sets, begin by accessing the filter set pages.
☛
NOTE:
Make sure you understand how filters work before attempting to use them. Read the section
“Packet Filter” on page 163 .
The procedure for creating and maintaining filter sets is as follows:
1.
Add a new filter set.
See Adding a filter set , below.
2.
Create the filters for the new filter set.
See “Adding filters to a filter set” on page 172 .
3.
Associate the filter set with either the LAN or WAN interface.
See “Associating a Filter Set with an Inter face” on page 176 .
The sections below explain how to execute these steps.
Adding a filter set
You can create up to eight different custom filter sets. Each filter set can contain up to 16 output filters and
up to 16 input filters. There can be a maximum of 32 filter rules in the system.
To add a new filter set, click the
Add
button in the Filter Sets page. The Add Filter Set page appears.
Enter new name for the filter set, for example Filter Set 1 .
To save the filter set, click the
Submit
button. The saved filter set is empty (contains no filters), but you
can return to it later to add filters (see “ Adding filters to a filter set” ).
☛
NOTE:
As you begin to build a filter set, and as you add filters, after your first entr y, the Aler t icon