manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 156

Administrator’s Handbook

156

You can add more exposed addresses by clicking the 

Add more Exposed Addresses

 link. A list of pre-

viously configured exposed addresses appears.

Click the 

Add

 button to add a new range of exposed addresses.

You can edit a previously configured range by clicking the 

Edit

 button, or delete the entr y entirely by clicking 

the 

Delete

 button.

All configuration changes will trigger the Aler t Icon. 

 Click on the Aler t icon.

This allows you to validate the configuration and reboot the Gateway.

Click the 

Save and Restart

 link. You will be asked to confirm your choice, and the Gateway will reboot 

with the new configuration.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands