Motorola Netopia 7000, Administrator'S Handbook

Page: 298 / 368

Administrator’s Handbook
298
System Settings
You can configure system settings to assign a name to your Motorola Netopia® Gateway and to specify
what types of messages you want the diagnostic log to record.
set system name
name
Specifies the name of your Motorola Netopia® Gateway. Each Motorola Netopia® Gateway is assigned a
name as par t of its factor y initialization. The default name for a Motorola Netopia® Gateway consists of the
word “Netopia-3000/XXX” where “XXX” is the serial number of the device; for example, Netopia-3000/
9437188. A system name can be 1 – 255 characters long. Once you have assigned a name to your Motor-
ola Netopia® Gateway, you can enter that name in the
Address text field of your browser to open a connec-
tion to your Motorola Netopia® Gateway.
☛
NOTE:
Some broadband cable-oriented Ser vice Providers use the System Name as an impor tant
identification and suppor t parameter. If your Gateway is par t of this type of network, do NOT
alter the System Name unless specifically instructed by your Ser vice Provider.
set system diagnostic-level
{ off | low | medium | high | alerts | failures }
Specifies the types of log messages you want the Motorola Netopia® Gateway to record. All messages with
a level equal to or greater than the level you specify are recorded. For example, if you specify set system
diagnostic-level
medium
, the diagnostic log will retain medium-level informational messages, aler ts, and
failure messages. Specifying
off
turns off logging.
Use the following guidelines:
•
low - Low-level informational messages or greater; includes trivial status messages.
•
medium - Medium-level informational messages or greater; includes status messages that can help
monitor network traffic.
•
high - High-level informational messages or greater; includes status messages that may be significant
but do not constitute errors. The default.
•
alerts - Warnings or greater; includes recoverable error conditions and useful operator information.
•
failures - Failures; includes messages describing error conditions that may not be recoverable.