manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 63

63

The screen expands.

Router

 

EDCA Parameters

 (Enhanced Distributed Channel Access) govern wireless data from your Gate-

way to the client; 

Client EDCA Parameters

 govern wireless data from the client to your Gateway.

☛  

NOTE:

It is not recommended that you modify these settings without direct knowledge or instructions 
to do so. Modifying these settings inappropriately could seriously degrade network per for-
mance.

•

AIFs

: (Arbitration Inter frame Spacing) the wait time in milliseconds for data frames.

•

cwMin

: (Minimum Contention Window) upper limit in milliseconds of the range for determining initial ran-

dom backoff. The value you choose must be lower than cwMax.

•

cwMax

: (Maximum Contention Window) upper limit in milliseconds of the range of determining final ran-

dom backoff. The value you choose must be higher than cwMin.

•

TXOP Limit

: Time inter val in microseconds that clients may initiate transmissions. 

(When 

Operating Mode

 is 

B-only

, default values are used and this field is not configurable.)

Wireless MAC Authorization

Wireless MAC Authorization

 allows you to specify which client PCs are allowed to join the wireless LAN by 

specific hardware address. Once it is enabled, only entered MAC addresses that have been set to 

Allow

 will 

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands