manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 217

217

Link: 

Diagnostics

The diagnostics section tests a number of different things at the same time, including the DSL line, the 
Ethernet inter face and the PPPoE session.

The following table summarizes the possible results.

CODE

Description

PASS

The test was successful.

FAIL

The test was unsuccessful.

SKIPPED

The test was skipped because a test on which it depended failed, or it was not sup-
por ted by the ser vice provider equipment to which it is connected, or it does not 
apply.

PENDING

The test timed out without producing a result. Tr y running the test again.

WARNING

The test was unsuccessful. The Ser vice Provider equipment your Gateway connects to 
may not suppor t this test.

==== Checking LAN Interfaces

Check Ethernet LAN connect                             : 

PASS

 Check IP connect to Ethernet (LAN)                    : 

PASS

  Pinging Gateway                                      : 

PASS

 Check MAC-Bridge connect to Ethernet  (LAN)           : 

PASS

==== Checking DSL (WAN) Interfaces

Check DSL Synchronization                              : 

PASS

 Check ATM Cell-Delineation                            : 

PASS

  ATM OAM Segment Ping through  (vcc1)                 : 

WARNING

    

*** Don't worry, your service provider may not support this test

  ATM OAM End-To-End Ping through  (vcc1)              : 

WARNING

    

*** Don't worry, your service provider may not support this test

  Check Ethernet connect to AAL5  (vcc1)               : 

PASS

   Check PPPOE connect to Ethernet (vcc1)              : 

PASS

    Check PPP connect to PPPOE (vcc1)                  : 

PASS

     Check IP connect to PPP (vcc1)                    : 

PASS

      Pinging Gateway                                  : 

PASS

==== Checking Miscellaneous

Check DNS- Query for netopia.com                       : 

SKIPPED

Ping DNS Server Primary IP Address                     : 

SKIPPED

TEST DONE

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands