Motorola AP-7131N-FGR, Product Reference Manual

Page: 271 / 708

Configuring Access Point Security 6-43
4. Configure the FTP field to block or restrict various traffic on the network.
Block Outbound SMTP
Commands Simple Mail Transport Protocol (SMTP) is the Internet standard for
host-to-host mail transport. SMTP generally operates over TCP on
port 25. SMTP filtering allows the blocking of any or all outgoing
SMTP commands. Check the box next to the command to disable
that command when using SMTP across the access point’s WAN
port.
• HELO - (Hello) Identifies the SMTP sender to the SMTP
receiver.
• MAIL - Initiates a mail transaction where data is delivered to
one or more mailboxes on the local server.
• RCPT - (Recipient) Identifies a recipient of mail data.
• DATA - Tells the SMTP receiver to treat the following
information as mail data from the sender.
• QUIT - Tells the receiver to respond with an OK reply and
terminate communication with the sender.
• SEND - Initiates a mail transaction where mail is sent to one
or more remote terminals.
• SAML - (Send and Mail) Initiates a transaction where mail
data is sent to one or more local mailboxes and remote
terminals.
• RESET - Cancels mail transaction and informs the recipient
to discard data sent during transaction.
• VRFY - Asks receiver to confirm the specified argument
identifies a user. If argument does identify a user, the full
name and qualified mailbox is returned.
• EXPN - (Expand) Asks receiver to confirm a specified
argument identifies a mailing list. If the argument identifies
a list, the membership list of the mailing list is returned.