Motorola AP-7131N-FGR, Product Reference Manual

Page: 128 / 708

AP-7131N-FGR Access Point Product Reference Guide 4-38
3. Configure the SNMP v3 Trap Configuration field (if SNMP v3 Traps are used) to modify
the following:
Port Specify a destination User Datagram Protocol (UDP) port for
receiving traps. The default is 162.
Community Enter a community name specific to the SNMP-capable client that
receives the traps.
SNMP Version
Use the SNMP Version drop-down menu to specify v1 or v2.
Some SNMP clients support only SNMP v1 traps, while others
support SNMP v2 traps and possibly both, verify the correct traps
are in use with clients that support them.
Add Click Add to create a new SNMP v3 Trap Configuration entry.
Delete Select Delete to remove an entry for an SNMP v3 user.
Destination IP Specify a numerical (non DNS name) destination IP address for
receiving the traps sent by the access point SNMP agent.
Port Specify a destination User Datagram Protocol (UDP) port for
receiving traps.
Username Enter a username specific to the SNMP-capable client receiving
the traps.
Security Level Use the Security Level drop-down menu to specify a security
level of noAuth (no authorization), AuthNoPriv (authorization
without privacy), or AuthPriv (authorization with privacy).
The “NoAuth” setting specifies no login authorization or encryption
for the user. The “AuthNoPriv” setting requires login authorization,
but no encryption. The “AuthPriv” setting requires login
authorization and uses the
Data Encryption Standard (DES) .
Add Click Add to create a new SNMP v1/v2c Trap Configuration entry.