manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

The Motorola AP-7131N-FGR is a high-performance wireless access point renowned for its reliable connectivity. Ensure seamless installation with the comprehensive Installation Manual available for free download at manualshive.com. Explore this manual to maximize the product's potential and unlock its advanced features effortlessly.

Share
Download
background image

ix

Network LAN, WLAN-Mapping Commands . . . . . . . . . . . . . . . . . . . . . . 8-19
Network LAN, DHCP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28

Network Type Filter Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-34

Network WAN Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-39

Network WAN NAT Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-42

Network WAN, VPN Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-48
AP7131N>admin(network.wan.content)> . . . . . . . . . . . . . . . . . . . . . . . . 8-57
Network WAN, Dynamic DNS Commands . . . . . . . . . . . . . . . . . . . . . . . 8-61

Network Wireless Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-65

Network WLAN Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-66
Network Security Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-79

Network ACL Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-86
Network Radio Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . 8-91
Network Quality of Service (QoS) Commands. . . . . . . . . . . . . . . . . . . . 8-121

Network Rate Limiting Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-126
Network Rogue-AP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-129
WIPS Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-139

Network MU Locationing Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 8-142

Network Firewall Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-145
Network Router Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-150

System Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-156

Power Setup Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-162
Adaptive AP Setup Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-165

System Access Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-169
System Certificate Management Commands . . . . . . . . . . . . . . . . . . . . . . . . 8-172

System SNMP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-185

System SNMP Access Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-186
System SNMP Traps Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-191

System User Database Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-197
System Radius Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-210
System Network Time Protocol (NTP) Commands  . . . . . . . . . . . . . . . . . . . . 8-233

System Log Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-238
System Configuration-Update Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . 8-243
Firmware Update Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-251
FIPS Test Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-255

Statistics Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-259

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131N-FGR

T-Mobile webConnect Jet Getting Started Manual preview
webConnect Jet
Brand: T-Mobile Pages: 8
T-Mobile Franklin T9 Quick Start Manual preview
Franklin T9
Brand: T-Mobile Pages: 3
Homefibre OMA111WLAN-220 Installation Instructions preview
OMA111WLAN-220
Brand: Homefibre Pages: 2
Hirschmann BAT54-F User Manual preview
BAT54-F
Brand: Hirschmann Pages: 42
iBall Baton iB-WAP150N User Manual preview
iB-WAP150N
Brand: iBall Baton Pages: 71
Waldmann EnOcean TALK MODUL G2 Operating Manual preview
EnOcean TALK MODUL G2
Brand: Waldmann Pages: 68
Acksys RailBox 11ac/WiFi 5 Quick Installation Manual preview
RailBox 11ac/WiFi 5
Brand: Acksys Pages: 36
ICP DAS USA WF-2015 User Manual preview
WF-2015
Brand: ICP DAS USA Pages: 61
Ebyte E220-900MM22S Manual preview
E220-900MM22S
Brand: Ebyte Pages: 14
Datacom DM984-100B Administration Manual preview
DM984-100B
Brand: Datacom Pages: 105
Acksys AirBox Series Manual preview
AirBox Series
Brand: Acksys Pages: 36
Teleconnect ANGLOPACK Comtrend CT-6382T Quick Setup Manual preview
ANGLOPACK Comtrend CT-6382T
Brand: Teleconnect Pages: 6
Silvercrest IAN 276299 Operation And Safety Notes preview
IAN 276299
Brand: Silvercrest Pages: 20
Silvercrest SWR 1166 A1 Operation And Safety Notes preview
SWR 1166 A1
Brand: Silvercrest Pages: 66
Nortel WLAN Access Port 223x Quick Installation Manual preview
WLAN Access Port 223x
Brand: Nortel Pages: 46
TELEFONICA Wireless Router Installation Manual preview
Wireless Router
Brand: TELEFONICA Pages: 20
Telefonix PDT Cabin Ace-2 User Manual preview
Cabin Ace-2
Brand: Telefonix PDT Pages: 48
Linksys WRV210 - Wireless-G VPN Router Quick Install Manual preview
WRV210 - Wireless-G VPN Router
Brand: Linksys Pages: 16

Brands by name

Popular brands

Load more brands