manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 146

AP-7131N-FGR Access Point Product Reference Guide

4-56

If updating the access point manually, configure the 

Update Firmware

 fields as required 

to set a filename and target firmware file upload location for firmware updates. 

3.

Specify the name of the target firmware file within the 

Filename

 field.

4.

If the target firmware file resides within a directory, specify a complete path for the file 
within the 

Filepath(optional)

 field.

5.

Enter an IP address for the SFTP server used for the update. Only numerical IP address names 
are supported, no DNS can be used.

6.

Set the username for the SFTP server login.

7.

Click the 

Perform Update

 

button to initiate the update. Upon confirming the firmware 

update, the AP reboots and completes the update. 

8.

Confirm the access point configuration is the same as it was before the firmware update. If 
they are not, restore the settings. Refer to 

Importing/Exporting Configurations on page 4-50

 

for instructions on exporting the configuration back to the access point.

9.

Click 

Apply 

to save the filename and filepath information entered into the Firmware Update 

screen. The Apply button does not execute the firmware, only saves the update settings 
entered.

10. Click 

Undo Changes 

(if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on Firmware Update screen to the last saved configuration.

CAUTION

If using a Linux server configured to support the BootP “bf” option, an 
automatic firmware update is not be triggered unless both the

 Enable 

Automatic Firmware Update

 and 

Enable Automatic 

Configuration Update 

options are selected. If the Configuration 

Update option is disabled, the access point will not download the 
configuration file. Without the configuration file, the access point 
cannot parse for the firmware file name required to trigger the 
firmware update. 

NOTE

Click 

Apply

 to save the settings before performing the firmware update. 

The user is not able to navigate the access point user interface while the 
firmware update is in process.

NOTE

The access point must complete the reboot process to successfully update 
the device firmware, regardless of whether the reboot is conducted using 
the GUI or CLI interfaces.

!

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands