Motorola AP-7131N-FGR Product Reference Manual Download Page 469

Page: 469 / 708

8-131

AP7131N>admin(network.wireless.rogue-ap)> set

Description:

Defines the access point ACL rogue AP method.

Syntax:

Example:

admin(network.wireless.rogue-ap)>

set mu-scan enable

admin(network.wireless.rogue-ap)>

set interval 10

admin(network.wireless.rogue-ap)>

set on-channel disable

admin(network.wireless.rogue-ap)>

set detector-scan disable

admin(network.wireless.rogue-ap)>

set ABG-scan disable

admin(network.wireless.rogue-ap)>

set motorola-ap enable

admin(network.wireless.rogue-ap)>

set applst-ageout 10

admin(network.wireless.rogue-ap)>

set roglst-ageout 10

admin(network.wireless.rogue-ap)>

show

MU Scan

: enable

MU Scan Interval

: 10 minutes

On Channel

: disable

Detector Radio Scan

: disable

Auto Authorize Motorola APs

: enable

Approved AP age out

: 10 minutes

Rogue AP age out

: 10 minutes

For information on configuring the Rogue AP options available to the access point using the applet (GUI), see

Configuring Rogue AP Detection on page 6-44

set mu-scan

<mode>

Enables or disables to permit MUs to scan for rogue APs.

interval

Define an interval for associated MUs to beacon in attempting to locate rogue APs.
Value not available unless mu-scan is enabled.

on-channel

<mode>

Enables or disables on-channel detection.

detector-scan

<mode>

Enables or disables AP detector scan (dual-radio model only).

ABG-scan

<mode>

Enables or disables A/BG Detector Scan Mode.

motorola-ap

<mode>

Enables or disables the Authorize Any AP with a Motorola MAC address option.

applst-ageout

Sets the approved AP age out time.

roglst-ageout

Sets the rogue AP age out time.

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AP-7131N-FGR

Reviews:

Brands by name

Popular brands

Motorola AP-7131N-FGR, Product Reference Manual

Search results

Summary of Contents for AP-7131N-FGR

Reviews:

Brands by name

Popular brands