manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 52

AP-7131N-FGR Access Point Product Reference Guide

2-8

2.6.1 Installing the Power Injector 

Refer to the following sections for information on planning, installing, and validating the installation:

•

Preparing for Site Installation

•

Cabling the Power Injector

2.6.1.1 Preparing for Site Installation

The Power Injector can be installed free standing, on an even horizontal surface or wall mounted 
using the unit’s wall mounting key holes. The following guidelines should be adhered to before 
cabling the Power Injector to an Ethernet source and access point:

•

Do not block or cover airflow to the Power Injector

•

Keep the unit away from excessive heat, humidity, vibration and dust.

CAUTION

The access point supports any standards-based compliant power 
source (including non-Motorola power sources). However, using the 
wrong solution (including a POE system used on a legacy Motorola 
access point) could either limit functionality or severely damage the 
access point and void the product warranty.

!

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands