Motorola AP-7131N-FGR, Product Reference Manual

Page: 78 / 708

AP-7131N-FGR Access Point Product Reference Guide 3-10
4. Refer to the new Radio Configuration field to define how WLAN and WIPS are supported
by the access point’s radio(s). Remember, the options available depend on the radio model
SKU deployed.
A dual radio model access point displays 7 configuration options. Refer to the following
table for the options available to dual radio models.
Time Server Optionally enter the IP address of the server used to provide system time to the
access point within the
Time Server field. Once the IP address is entered, the
access point’s Network Time Protocol (NTP) functionality is engaged
automatically.
With the AP-7131N-FGR, a VPN tunnel is established using
the NTP server.
Refer to Configuring Network Time Protocol (NTP) on page 4-
44 for information on setting alternate time servers and setting a
synchronization interval for the access point to adjust its displayed time.
WIPS Servers Define a primary and alternate WIPS server IP Address for WIPS Server 1 and
2. These are the addresses of the primary and secondary WIPS console server.
WIPS support requires a Motorola AirDefense WIPS Server on the network.
WIPS functionality is not provided by the access point alone. The access point
works in conjunction with the dedicated WIPS server(s).
NOTE The System Name and Country are also configurable within the System
Settings screen. Refer to Configuring System Settings on page 4-2 (if
necessary) to set a system location and admin email address for the
access point or to view other default settings.
Radio Button AP-7131N-FGR Dual Radio SKU
2.4 GHz WLAN,
& Sensor Radio1 WLAN,
Radio 2 WIPS
5.0 GHz WLAN
& Sensor Radio 1 WIPS,
Radio 2 WLAN
2.4 GHz WLAN &
5.0 GHz WLAN only - no Sensor Radio 1 WLAN,
Radio 2 WLAN
Sensor only Spectrum Analysis mode
(no WLAN) Radio 1 WIPS,
Radio 2 WIPS
2.4 GHz WLAN - no Sensor Radio1 WLAN,
Radio 2 Disabled