manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 330

AP-7131N-FGR Access Point Product Reference Guide

7-30

8.

Click 

OK 

to exit the screen. 

7.5.2 Pinging Individual MUs

The access point can verify its link with an MU by sending WNMP ping packets to the associated MU. 
Use the

 Echo Test

 screen to specify a target MU and configure the parameters of the ping test.

To ping a specific MU to assess its connection with an access point:

1.

Select

 Status and Statistics 

- > 

MU Stats 

from the access point menu tree.

2.

Select the 

Echo Test

 

button from within the 

MU Stats Summary 

screen

3.

Specify the following ping test parameters.

Avg Num of Retries

Displays the average number of retries for the MU. The number in 
black represents average retries for the last 30 seconds and the 
number in blue represents average retries for the last hour.

Dropped Packets 

Displays the percentage of packets the AP gave up as not received 
on for the selected MU. The number in black represents the 
percentage of packets for the last 30 seconds and the number in 
blue represents the percentage of packets for the last hour.

% of Undecryptable 
Pkts

Displays the percentage of undecryptable packets for the MU. The 
number in black represents the percentage of undecryptable 
packets for the last 30 seconds and the number in blue represents 
the percentage of undecryptable packets for the last hour.

NOTE

An echo test initiated from the access point 

MU Stats Summary

 screen 

uses WNMP pings. Therefore, target clients that are not Motorola MUs 
are unable to respond to the echo test.

Station Address

The IP address of the target MU. Refer to the 

MU Stats Summary 

screen for associated MU IP address information.

Number of ping

Specify the number of ping packets to transmit to the target MU. 
The default is 100.

Packet Length

Specify the length of each data packet transmitted to the target 
MU during the ping test. The default is 100 bytes.

Packet Data

Defines the data to be transmitted as part of the test.

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands