manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 79

Getting Started

3-11

5.

Select the Quick Setup screen’s 

Network Configuration

 tab to define a minimum set of 

WAN or LAN configuration values. The WAN tab displays by default.

Set a minimum set of parameters for using the WAN interface. 

a. Select the 

Enable WAN Interface

 checkbox to enable a connection between the 

access point and a larger network or outside world through the WAN port. Disable this 
option to effectively isolate the access point’s WAN connection. No connections to a 
larger network or the Internet will be possible. MUs cannot communicate beyond the 
configured subnets.

b. Select the 

This Interface is a DHCP Client

 checkbox to enable DHCP for the access 

point’s WAN connection. This is useful, if the larger corporate network or

 Internet 

Service Provider (ISP)

 uses DHCP. DHCP is a protocol that includes mechanisms for IP 

5.0 GHz WLAN - no Sensor

Radio1 Disabled, 
Radio 2 WLAN

Radios Off

Radios 1 and 2 Disabled

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands