manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 268

AP-7131N-FGR Access Point Product Reference Guide

6-40

3.

Click the 

Reset VPNs 

button to reset active VPNs. Selecting 

Reset VPNs

 forces 

renegotiation of all the Security Associations and keys. Users could notice a slight pause in 
network performance.

4.

Reference the 

IKE Summary

 

field to view the following: 

Status

The 

Status

 

column lists the status of each configured tunnel. 

When the tunnel is not in use, the status reads 

NOT_ACTIVE

. 

When the tunnel is connected, the status reads 

ACTIVE

.

Outb SPI

The 

Outb SPI 

column displays the outbound 

Security Parameter 

Index

 (SPI) for each tunnel. The SPI is used locally by the access 

point to identify a security association. There are unique outbound 
and inbound SPIs.

Inb SPI

The 

Inb SPI 

column displays the

 

inbound 

Security Parameter Index

 

(SPI) for each of the tunnels. The SPI is used locally by the access 
point to identify a security association. There are unique outbound 
and inbound SPIs.

Life Time

Use the 

Life Time 

column to view the lifetime associated with a 

particular Security Association (SA). Each SA has a finite lifetime 
defined. When the lifetime expires, the SA can no longer be used 
to protect data traffic. The maximum SA lifetime is 65535 seconds.

Tx Bytes

The 

Tx Bytes 

column lists the amount of data (in bytes) 

transmitted through each configured tunnel. 

Rx Bytes

The 

Rx Bytes

 

column lists the amount of data (in bytes) received 

through each configured tunnel. 

Tunnel Name

Displays the name of each of the tunnels configured to use IKE for 
automatic key exchange. 

IKE State

Lists the state for each of the tunnels configured to use IKE for 
automatic key exchange. When the tunnel is not active, the 

IKE 

State

 field displays 

NOT_CONNECTED.

 When the tunnel is 

active, the 

IKE State 

field displays 

CONNECTED

.

Destination IP

Displays the destination IP address for each tunnel configured to 
use IKE for automatic key exchange. 

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands