manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 269

Configuring Access Point Security

6-41

5.

Click 

Logout 

to securely exit the access point applet. A prompt displays confirming the 

logout before the applet is closed.

6.8 Configuring Content Filtering Settings

Content filtering allows system administrators to block specific commands and URL extensions from 
going out through the access point’s WAN port. Therefore, content filtering affords system 
administrators selective control on the content proliferating the network and is a powerful data and 
network screening tool. Content filtering allows the blocking of up to 10 files or URL extensions and 
allows blocking of specific outbound requests.

To configure content filtering for the access point: 

1.

Select 

Network Configuration 

-> 

WAN 

-> 

Content Filtering 

from the access point menu 

tree.

Remaining Life

Lists the remaining life of the current IKE key for each tunnel. When 
the remaining life on the IKE key reaches 0, IKE initiates a 
negotiation for a new key. IKE keys associated with a renegotiated 
tunnel.

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands