manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

The Motorola AP-7131N-FGR is a high-performance wireless access point renowned for its reliable connectivity. Ensure seamless installation with the comprehensive Installation Manual available for free download at manualshive.com. Explore this manual to maximize the product's potential and unlock its advanced features effortlessly.

Share
Download
background image

AP-7131N - FGR Access Point Product Reference Guide

x

Chapter 9. Configuring Mesh Networking

Mesh Networking Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1

The Client Bridge Association Process  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3

Client Bridge Configuration Process Example . . . . . . . . . . . . . . . . . . . . . .9-4

Spanning Tree Protocol (STP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-4
Defining the Mesh Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-5
Mesh Networking and the Access Point’s Two Subnets. . . . . . . . . . . . . . . . . .9-5
Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6
Impact of Importing/Exporting Configurations to a Mesh Network  . . . . . . . . .9-6

Configuring Mesh Networking Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6

Setting the LAN Configuration for Mesh Networking Support . . . . . . . . . . . . .9-6
Configuring a WLAN for Mesh Networking Support. . . . . . . . . . . . . . . . . . . . .9-9
Configuring the Access Point Radio for Mesh Support . . . . . . . . . . . . . . . . . .9-13

Mesh Network Deployment - Quick Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-20

Scenario 1 - Two Base Bridges and One Client Bridge . . . . . . . . . . . . . . . . . .9-20

Configuring AP#1:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-20
Configuring AP#2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-24

Configuring AP#3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-25
Verifying Mesh Network Functionality for Scenario #1. . . . . . . . . . . . . .9-27

Scenario 2 - Two Hop Mesh Network with a Base and a Client Bridge . . . . .9-27

Configuring AP#1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-27
Configuring AP#2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-28

Configuring AP#3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-29
Verifying Mesh Network Functionality for Scenario #2. . . . . . . . . . . . . .9-31

Mesh Networking Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . .9-32

Chapter 10. Adaptive AP

Adaptive AP Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1

Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2
Adaptive AP Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3
Licensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3
Switch Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3

Auto Discovery using DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4
Manual Adoption Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-5

Securing a Configuration Channel Between Switch and AP . . . . . . . . . . . . . .10-5
Adaptive AP WLAN Topology  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-5

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AP-7131N-FGR

Ubiquiti UAP-AC Quick Start Manual preview
UAP-AC
Brand: Ubiquiti Pages: 24
Caimore CM520-8AW User Manual preview
CM520-8AW
Brand: Caimore Pages: 83
IgniteNet SunSpot N300 Quick Start Manual preview
SunSpot N300
Brand: IgniteNet Pages: 7
C Spire R772 User Manual preview
R772
Brand: C Spire Pages: 44
Ovislink Airlive WIAS-3200N Faq preview
Airlive WIAS-3200N
Brand: Ovislink Pages: 7
Ekselans AP 1200 User Manual preview
AP 1200
Brand: Ekselans Pages: 25
Digi TransPort DR64 Installation Manual preview
TransPort DR64
Brand: Digi Pages: 13
NDC Instant Wave User Manual preview
Instant Wave
Brand: NDC Pages: 33
Intellinet 524735 Brochure & Specs preview
524735
Brand: Intellinet Pages: 4
Intellinet 523455 User Manual preview
523455
Brand: Intellinet Pages: 36
Intellinet 525794 User Manual preview
525794
Brand: Intellinet Pages: 47
Intellinet 525497 User Manual preview
525497
Brand: Intellinet Pages: 82
Intellinet 524315 User Manual preview
524315
Brand: Intellinet Pages: 127
Jaton AM4200T User Manual preview
AM4200T
Brand: Jaton Pages: 8
Nortel Internet BWA System 3200 User Manual preview
Internet BWA System 3200
Brand: Nortel Pages: 68
ELTEX WEP-12ac Quick Manual preview
WEP-12ac
Brand: ELTEX Pages: 22
ELTEX RG-5421G-Wac User Manual preview
RG-5421G-Wac
Brand: ELTEX Pages: 147
Multitech MultiModem rCell MTCBA-E-EN2 User Manual preview
MultiModem rCell MTCBA-E-EN2
Brand: Multitech Pages: 58

Brands by name

Popular brands

Load more brands