manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 183

Network Management

5-35

4.

Configure the 

Security 

field as required to set the data protection requirements for the 

WLAN.

5.

Configure the 

Advanced 

field as required to set MU interoperability permissions, secure 

beacon transmissions, broadcast ESSID acceptance and 

Quality of Service (QoS)

 policies.

Enable Client Bridge 
Backhaul

Select the Enable 

Client Bridge Backhaul 

checkbox to make the 

WLAN available in the 

WLAN

 drop-down menu within the 

Radio 

Configuration

 screen. This checkbox can be ignored for WLANs 

not supporting mesh networking, to purposely exclude them from 
the list of WLANs available in the Radio Configuration page 
selected specifically for mesh networking support. Only WLANs 
defined for mesh networking support should have this checkbox 
selected.

Enable Hotspot

Select the 

Enable Hotspot

 

checkbox to allow this WLAN (whether 

it be a new or existing WLAN) to be configured for hotspot support. 
Clicking the 

Configure Hotspot

 button launches a screen wherein 

the parameters of the hotspot can be defined. For information on 
configuring a target WLAN for hotspot support, see 

Configuring 

WLAN Hotspot Support on page 5-48

. For an overview of what a 

hotspot is and what it can provide your wireless network, see 

Hotspot Support on page 1-20

. 

CAUTION

A WLAN cannot be enabled for both mesh and hotspot support at the 
same time. Only one of these two options can be enabled at one time, 
as the GUI and CLI will prevent both from being enabled.

Security Policy

Use the scroll down 

Security Policies

 menu to select the security 

scheme best suited for the new or revised WLAN. Click the

 Create

 

button to launch the New Security Policy screen where a new 
policy can be created to suit the needs of the WLAN. For more 
information, see 

Configuring WLAN Security Policies on page 5-37

.

MU Access Control

Select an ACL policy suiting the WLAN‘s MU introperability 
requirements from the drop-down menu. If the existing ACL 
policies do not satisfy the requirements of the WLAN, a new ACL 
policy can be created by pressing the 

Create

 button. For more 

information, see 

Configuring a WLAN Access Control List (ACL) on 

page 5-38

.

!

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands