manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 242

AP-7131N-FGR Access Point Product Reference Guide

6-14

6.

Configure the 

Key Settings

 area as needed to set a 256-bit key.

Default (hexadecimal) 256-bit keys for WP2A/CCMP include:

1011121314151617

18191A1B1C1D1E1F

2021222324252627

28292A2B2C2D2E2F

7.

Configure the 

Fast Roaming (802.1x only) 

field as required to enable additional access 

point roaming and key caching options. This feature is applicable only when using 802.1x 
EAP authentication with WPA2/CCMP.

8.

Click the 

Apply 

button to save any changes made within this New Security Policy screen.

9.

Click the 

Cancel

 

button to undo any changes made within the WPA2/CCMP Settings field 

and return to the 

WLAN 

screen. This reverts all settings to the last saved configuration.

6.6 Configuring Firewall Settings

The access point's firewall is a set of related programs located in the gateway on the WAN side of 
the access point. The firewall uses a collection of filters to screen information packets for known 
types of system attacks. Some of the access point's filters are continuously enabled, others are 
configurable.

256-bit Key

Enter 16 hexadecimal characters into each of the four fields 
displayed.

Pre-Authentication

Selecting this option enables an associated MU to carry out an 
802.1x authentication with another access point before it roams to 
it. The access point caches the keying information of the client until 
it roams to the other access point. This enables the roaming client 
to start sending and receiving data sooner by not having to do 
802.1x authentication after it roams. This feature is only supported 
when 802.1x EAP authentication is enabled. 

NOTE

PMK key caching is enabled internally by default when 802.1x EAP 
authentication is enabled.

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands