manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 265

Configuring Access Point Security

6-37

Operation Mode

The Phase I protocols of IKE are based on the ISAKMP identity-
protection and aggressive exchanges. IKE main mode refers to the 
identity-protection exchange, and IKE aggressive mode refers to 
the aggressive exchange.

•

Main

 - Standard IKE mode for communication and key 

exchange.

•

Aggressive

 - Aggressive mode is faster, but less secure than 

Main mode. Identities are not encrypted unless public key 
encryption is used. The authentication method cannot be 
negotiated if the initiator chooses public key encryption 

Local ID Type

Select the type of ID to be used for the access point end of the SA.

•

IP

 - Select IP if the local ID type is the IP address specified 

as part of the tunnel. 

•

FQDN

 - Use FQDN if the local ID is a fully qualified domain 

name (such as 

sj.motorola.com

). 

•

UFQDN

 - Select UFQDN if the local ID is a user fully-qualified 

email (such as

 [email protected]

). 

Local ID Data

Specify the FQDN or UFQDN based on the Local ID type assigned. 

Remote ID Type

Select the type of ID to be used for the access point end of the 
tunnel from the 

Remote ID Type

 drop-down menu.

•

IP

 - Select the IP option if the remote ID type is the IP address 

specified as part of the tunnel.

•

FQDN

 - Select FQDN if the remote ID type is a fully qualified 

domain name (such as sj.motorola.com). The setting for this 
field does not have to be fully qualified, however it must 
match the setting for the Certificate Authority. 

•

UFQDN

 - Select this item if the remote ID type is a user 

unqualified email address (such as [email protected]). 
The setting for this field does not have to be unqualified, it 
just must match the setting of the field of the Certificate 
Authority. 

Remote ID Data

If FQDN or UFQDN is selected, specify the data (either the qualified 
domain name or the user name) in the 

Remote ID Data

 field.

IKE Authentication 
Mode 

Select the IKE authentication mode:

•

Pre-Shared Key (PSK)

 - Specify an authenticating algorithm 

and passcode used during authentication. 

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands