manualshive.com logo in svg

Motorola AP-7131N-FGR, Product Reference Manual

Share
Download
Motorola AP-7131N-FGR Product Reference Manual Download Page 632

AP-7131N-FGR Access Point Product Reference Guide

9-20

9.3 Mesh Network Deployment - Quick Setup

This section provides instructions on how to quickly setup and demonstrate mesh functionality using 
three access points. Two following two deployment scenarios will be addressed:

•

Scenario 1

 - Two base bridges (redundant) and one client bridge

•

Scenario 2

 - A two hop mesh network with a base bridge, repeater (combined base bridge 

and client bridge mode) and a client bridge.

9.3.1 Scenario 1 - Two Base Bridges and One Client Bridge

In scenario 1, the following three access point configurations will be deployed within the mesh 
network:

•

AP#1 - An active base bridge

•

AP#2 - A redundant base bridge

•

AP#3 - A client bridge connecting to both AP#1 and AP#2 simultaneously.

AP#1 and AP#2 will be configured somewhat the same. However there are some important (yet 
subtle) differences. Therefore, the configuration of each access point will be described separately.

9.3.1.1 Configuring AP#1:

1.

Provide a known IP address for the LAN1 interface.

Summary of Contents for AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands