Troubleshooting Reference
2-45
element
TM
Series
Table 2.9 CPU Connector Assignments
Connector
Assignment
Description
J3
RGOK
Hydraulic: Thermal overload and/or oil tank temp shutdown input.
Traction: Rope Gripper OK (not set) input.
OK = 24V. Triggered = 0V.
J3
+24V
+24V supply output for use with RGOK.
J3
L24V
+24V supply output for use with counterweight derailment detection.
J3
1
Common
J3
FRA
Main landing smoke/fire sensor input. Recall to alternate floor.
J3
FRS
Smoke/fire sensor for all landings but the main landing. Recall to main floor.
J3
FRSA
Fire Service Alternate initiating device, machine room input. Recall to alternate
floor.
J3
FRSM
Fire Service Main initiating device. Recall to main floor.
J4
MCE TEST
Do not use.
J5
ICEN/IN1
In car inspection enable / programmable input. See job prints. If the
CONFIG01, Building Setup in-car inspection option is set to Yes, this input may
only be used for in-car inspection Enable.
J5
ICPU/IN2
In car inspection UP input / programmable input. See job prints. If the
CONFIG01, Building Setup in-car inspection option is set to Yes, this input may
only be used for in-car inspection Up.
J5
ICPD/IN3
In car inspection DOWN input / programmable input. See job prints. If the
CONFIG01, Building Setup in-car inspection option is set to Yes, this input may
only be used for in-car inspection Down.
J5
IN4
Programmable input. See job prints.
J5
IN5
Programmable input. See job prints.
J5
IN6
Programmable input. See job prints.
J6
1 (pin 1)
Common. Serial fixtures to CAR.
J6
+24 (pin 2)
24V. Serial fixtures to CAR.
J6
CDATA (pin 3) Data. Serial fixtures to CAR.
J6
1 (pin4)
Common. Serial fixtures to HALL.
J6
+24V (pin 5)
24V. Serial fixtures to HALL.
J6
HDATA (pin 6) Data. Serial fixtures to HALL.
J7
CAN, modular See job prints. May be used with MC-CPI-2 board for extra I/O in cabinet.
J8
CAN, modular See job prints.
J9
SHLD
Shield connection, landing system/hoistway encoder
J9
B-
Quadrature B-, hoistway encoder
J9
B+
Quadrature B+, hoistway encoder
J9
A-/SPD1
Quadrature A- (encoder) or SPD1 from LS-EDGE-EL
J9
A+/SPD0
Quadrature A+ (encoder) or SPD0 from LS-EDGE-EL
J9
DZ
Door Zone, input
J10
INA
Access Enable
J10
ATU
Top Access, UP direction input
J10
ATD
Top Access, DOWN direction input and down access limit
J10
ABU
Bottom Access, UP direction input and up access limit
J10
ABD
Bottom Access, DOWN direction input
J11
CTEN
Car top inspection enable input
J11
INCP
In car inspection/normal input
J11
ICTU
Car top inspection UP button input
J11
ICTD
Car top inspection DOWN button input
