Configuration and Troubleshooting
2-2 Manual # 42-02-2P26
Using the Touch Screen/OBD
Element controls use a touchscreen user interface. The initial (and default) display is the Home
Display.
See “Home Screen” on page 1- 11.
Screens are arranged in “order of use” with the Home
screen first, followed by configuration screens, utility screens, and then diagnostics oriented
screens.
Home
Figure 2.1 Home Display Screen
On the Home display screen, “tabs” to the right of the window show what additional adjust-
ment, control, and diagnostic screens are available. Up and Down arrows scroll through the
tabs. To access a screen, simply touch the associated tab.
• When activated, main screens with many selections open to a sub-screen selection menu.
• To select/set a particular feature, simply touch it.
• If Yes/No, it will change from one state to the other.
• If there are more than two possible settings, a list will appear.
• If a time or value may be set, a numeric entry screen will open.
• The Save button allows you to save changes. (Save and Exit.)
• The Exit button allows you to exit the screen. Any unsaved changes will be ignored.
• Undo: Undo action but remain in menu.
We recommend you take a few minutes to become familiar with the touch screen interface. You
will find operation simple and predictable. See additional screen representations on the next
page.
Note
Screen freeze: If the screen should ever freeze or “lock up,” press RSTA on the SCE-CPU board.
Scrolling control
highlighted if additional parameters/
selections are available in this direction
Menu Tabs
highlighted when selected
