Motion Control Engineering Nidec Element Series, Manual

Page: 26 / 199

Installation
1-14 Manual # 42-02-2P26
Config 03
Building Security, page 2-14 Security settings
Emergency Power, page 2-14 Power type, recall and run selections
Recall Switches, page 2-15 Recall switch settings
Network Settings, page 2-15 IP address information
Table 1.6 Utilities
Topic Description
File Transfer, page 2-15 Allows you to selectively transfer controller parameters:
- Backup Current Settings
- Restore Backup Settings
- Restore Factory Settings
- Export Current Settings to USB Drive
- Import & Apply Settings from USB Drive
- Export Events to USB Drive
Register Calls, page 2-15 Car and hall call registration
Construct and Bypass Faults,
page 2-15
Enable Construction/Fault Bypass. Set fault bypass for Inspection
and Automatic modes.
Safety Tests, page 2-15 Commissioning tests (Test descriptions, page 1-62 )
Date and Time, page 2-15 Set date and time
Landing System Utilities, page 2-
15
Hoistway Learn (Landing System Learn); Landing system view;
Terminal switch learn.
Table 1.7 System IO
Topic Description
System Inputs, page 2-16 View system input status
System Outputs, page 2-16 View system output status
Programmed Inputs, page 2-16 View programmed input status
Programmed Outputs, page 2-16 View programmed output status
Main CPI IO’s View status of main CPI board IOs
Aux CPI IO’s View status of aux CPI board IOs
Table 1.8 System Diagnostics
Topic Description
Motion IO, page 2-16 Drive control, hoistway switches, emergency brake
Event Log, page 2-16 First In/First Out logging of system events
Door Control, page 2-16 View door control signal status
Diagnostics Tree, page 2-16 Safety related signal activity flags
Landing System, page 2-16 View landing system signal status
Active Events, page 2-16 View currently active system events
Table 1.5 Config 01, 02, and 03
Topic Description