Moog MSD Servo Drive Series, Device Help, Page: 243 / 320

NOTE

Additional times for the typical contact chatter on a contactor must
be taken into account when specifying the time for timer
P 148[0] -
MPRO_DRVCOM_ENMO_Time
. They may be several hundred
ms, depending on contactor.
MOOG
ID No.: CB40859-001 Date: 02/2018
MSD Servo Drive - Device Help
2 4 3
9 Input/Output settings
9.4 Analog inputs
Fig. 9.8: “Function selector of the analog inputs” dialog box
9.4.1 Standard analog inputs

There is a selector that can be used to assign a function to each analog
standard input (
P 109[0] - MPRO_INPUT_FS_ISA00
and
P 110[0] - MPRO_
INPUT_FS_ISA01
).

Certain functions will only be available with specific function packages.

Depending on the configured function, the “Options...” button may become
enabled. If it is, this button can be used to switch to a different screen directly
and define the function’s exact behaviour there.

Every analog input can be smoothed with a freely configurable filter time
(
P 405[0] - CON_ANA_Filt0
and
P 406[0] - CON_ANA_Filt1
).

P 427[0] - CON_ANA_CalibZero
can be used to trigger a zero correction
routine for both analog inputs. If you use this routine, there must not be any
voltage at the inputs.