18
MSD Multi-Axis System Operation Manual DC-AC Servo Drive
> 0 mm
1
2
1)
Paint
2)
Air gap
Figure 3.3 INCORRECT mounting of DC-AC Servo Drive
3.3 Wall mounting
(air cooling)
•
Use bare metal backing plates.
•
The rear of the DC-AC Servo Drive must have good contact to the switch
cabinet ground. The contact area must be bare metal to establish a good
ground connection to the switch cabinet ground. There must not be an air gap
between the rear wall of the DC-AC Servo Drive and the rear wall of the switch
cabinet.
•
The bases of the chokes must have good contact to the switch cabinet ground.
The contact area must be bare metal to establish a good ground connection to
the switch cabinet ground.
= 0 mm
1
2
1) Bare metal backing plate
2) Large area contact
Figure 3.2 CORRECT mounting of DC-AC Servo Drive
moog
Id. no.: CA97554-001 0
5
/2017
3 Mechanical installation
