Mitsubishi GOT2000 Series, Connection Manual

Page: 561 / 674

18. GOT MULTI-DROP CONNECTION
18.6 Setting of Serial Multi-Drop Connection Unit
18 - 19
18
GOT MU
L
T
I-DROP CONN
ECTION

Controller setting
1.
Set the following to the driver for the connected
equipment.
• Connection type dependent
The driver for connection with the GOT is fixed to the
following one.
• Multi-drop(Host)
2.
Perform the detailed settings for the driver.
■
Communication detail settings
3.
Set [Use the system information of Multidrop] as
necessary.
■
Setting the multi-drop system information
function
4.
Click the [Write] button when settings are completed.
5.
If the [Communication with GT01-RS4-M] dialog box
is closed, communication setting contents for GT01-
RS4-M does not remain.
• To maintain the communication setting contents,
click (export).
■
Exporting/Importing the communication
setting contents
• To use communication setting contents which are
saved previously, click (import).
■
Exporting/Importing the communication
setting contents

Setting the multi-drop system information
function
When checking the connection status of each GOT
which is connected to GT01-RS4-M on the PLC side,
set the multi-drop system information function.
The GOT connection status is stored in the PLC side
word device.
(1) Setting on the PLC side word device
1.
Select [Use the system information of Multidrop] and
click the [Set] button. The following dialog window is
displayed.
2.
Set the PLC side word device to [Head Device (10
Points)]. In this example, "D0" is set.