Mitsubishi Electric MDS-E, Instruction Manual

Page: 547 / 554

Date of revision Manual No.
Revision details
Mar. 2016 IB(NA)1501229-C
- "Shaft Characteristics", "Machine Accuracy", "Coupling with the Fittings" and
"Connection" in "Installation of Spindle Motor" were revised.
- "Installation of the Terminal Box Cover" was added.
- "Installation Direction and Clearance" and "Heating Value" were revised.
- "Spindle Side PLG Serial Output Encoder (TS5690, MU1606 Series)" was
revised.
- "Wiring and Connection" was revised.
- "Part System Connection Diagram" was revised.
- "Main Circuit Terminal Block/Control Circuit Connector" was revised.
- "Motor and Encoder Connection" was revised.
- "Connection of Tool Spindle Motor" was added.
- "Connection of Power Supply" and "Wiring of the Motor Brake" were revised.
- "Specified Speed Output" and "Spindle Coil Changeover" were revised.
- "STO (Safe Torque Off) Function" was revised.
- "Initial Setup" was revised.
- "Setting of Servo Specification Parameters", "Setting of Machine Side
Encoder" and "Setting of Speed Command Synchronous Control" were
revised.
- "List of Standard Parameters for Each Servo Motor" was revised.
- "Servo Parameters" was revised.
- "List of Standard Parameters for Each Spindle Motor" was revised.
- "Spindle Specification Parameters" and "Spindle Parameters" were revised.
- "Spindle-type Servo Parameters" was added.
- "Speed Loop Gain" and "OMR-FF Function" were revised.
- "Vibration Suppression Measures" was revised.
- "Vertical Axis Drop Prevention Control" was revised.
- "Spindle C Axis Adjustment (For Lathe System)" was revised.
- "List of Alarms" was revised.
- "Troubleshooting for Each Alarm No." and "Parameter Numbers during Initial
Parameter Error" were revised.
- "Replacing the Unit Fan" was revised.
- "Protection Function" was added.
- "Compliance to EC Directives" was revised.
- "EMC Installation Guidelines" was revised.
- "Higher Harmonic Suppression Measure Guidelines" was revised.
- "Global service network" was revised.
- Miswrite is corrected.
Sep. 2018 IB(NA)1501229-D - MDS-E-V3-80 and MDS-EH-V3-40 were added.
- The following servo motors were added.
HG46, HG56, HG96
- The following spindle motors were added.
SJ-D15/80-01, SJ-D18.5/80-01, SJ-D22/80-01, SJ-D26/80-01, SJ-DG3.7/
120-03T, SJ-DG5.5/120-04T, SJ-DG7.5/120-05T, SJ-DG11/100-03T, SJ-
DG11/120-03T, SJ-DL0.75/100-01, SJ-DL1.5/100-01, SJ-DL3.7/240-01T,
SJ-DL5.5/240-05T, SJ-V22-06ZT, SJ-4-V22-18ZT, SJ-4-V26-08ZT, SJ-4-
V37-04ZT
- The following spindle motors were deleted.
SJ-V7.5-03ZT, SJ-V11-08ZT, SJ-V11-13ZT
- The following tool spindle motors were added.
HG46, HG56, HG96, HG453, HG703, HG903, HG-JR73, HG-JR153, HG-
JR734, HG-JR1534
- "Precautions for Safety" was revised.
- Function Specifications List was revised.
- "Installation of Servo Motor" was revised.
- "Installation of Spindle Motor" was revised.