manualshive.com logo in svg

Mitsubishi Electric 13JV28, Reference Manual

The Mitsubishi Electric 13JV28 is an exceptional product that guarantees superior performance. For a comprehensive understanding of its features and functions, you can refer to the reference manual available for free download from our website. Gain valuable insights and optimize your experience with this remarkable device.

Share
Download
background image

292

10  Ethernet
10.5  Backing up/Restoring Data of Devices Supporting iQSS

■

Setting the backup setting

1.

Setting a target module type

Set a target module with the lower 8 bits of SD1362 (iQ Sensor Solution data backup/restoration target module, execution unit 
setting).

2.

Setting an execution unit

Set a unit to specify the range of data to be backed up at once.
Specify the execution unit to the upper 8 bits of SD1362.

3.

Setting a number for a data backup folder name

Set a folder number to SD1363 (iQ Sensor Solution backup/restoration folder number setting).

*1 When the specified folder number exists, the operation to be performed depends on the specification of the execution unit as follows:

4.

Setting a target device

 • Setting a module
When '1H' (module unit) is set for the execution unit, set a module to SD1364 (iQ Sensor Solution data backup/restoration 
target setting (target module)).

 • Setting IP addresses
When '2H' (IP address unit) is set for the execution unit, set target devices (IP address) to SD1365 (iQ Sensor Solution data 
backup/restoration target setting (target device 1)) and SD1366 (iQ Sensor Solution data backup/restoration target setting 
(target device 2)).

*1 IP addresses within the range from 0.0.0.1 to 223.255.255.254

Target module type

Description

3H: Ethernet

Set this to specify a device supporting iQSS which is connected to Ethernet.

Execution unit

Description

1H: Module unit

Set this to collect the information of the device supporting iQSS connected to an Ethernet and to perform data 
backup.
Device supporting iQSS which communicate with a backup target module are backed up.

2H: IP address unit

Set this to specify the device supporting iQSS with the specified IP address among the devices supporting iQSS 
which are connected to Ethernet.

Target folder

Description

FFFFH: Automatic specification (default)

Among the numbers (0 to 99) that are not used for backup folder names, the smallest number is used for a new 
backup folder name.
An error occurs when unused number is no longer available due to such cases as the number of folders reached 
the upper limit.

FFFEH: Automatic specification (folder 
deletion supported)

Among the numbers (0 to 99) that are not used for backup folder names, the smallest number is used for a new 
backup folder name.
The oldest backup folder (date_number) is deleted and the number of the deleted folder is used for a new backup 
folder name when unused number is no longer available due to such cases as the number of folders reached the 
upper limit.

0 to 99: Target folder specification

Specify a number (0 to 99) of the backup folder name.
When another folder with the same number exists, the target data is overwritten in execution unit without 
changing the folder name.

*1

Execution unit

Operation

1H: Module unit

When the backup data with the same target module exists, the backup folder (target module_IP address) is 
deleted before performing data backup.

2H: IP address unit

When the backup data with the same target module and the same target IP address exists, the backup folder 
(target module_IP address) is deleted before performing data backup.

Target device (Module)

Description

03FFH: Built-in Ethernet

Set this to specify a device supporting iQSS which is connected to a built-in Ethernet.

Number

Target device (IP address)

Description

SD1365

0 to 65536 (FFFFH): IP address (lower 16 bits)

*1

Set the IP address of a target device supporting iQSS.

SD1366

0 to 57343 (DFFFH): IP address (upper 16 bits)

*1

Summary of Contents for 13JV28



























































































































































































































































































































































































Reviews:

No comments

Related manuals for 13JV28

Panasonic KX-TVP50 Getting Started preview
KX-TVP50
Brand: Panasonic Pages: 16
Hard Head 791221 Operating Instructions Manual preview
791221
Brand: Hard Head Pages: 40
Harbor Freight Tools 3394 Assembly And Operating Instructions Manual preview
3394
Brand: Harbor Freight Tools Pages: 7
Racing PY Series Installation Manual Book preview
PY Series
Brand: Racing Pages: 13
OFFCARR FreeWheel Setup Manual preview
FreeWheel
Brand: OFFCARR Pages: 12
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Zebronics ZEB-LPC2365 User Manual preview
ZEB-LPC2365
Brand: Zebronics Pages: 6
Olympus PT-EP01 Instruction Manual preview
PT-EP01
Brand: Olympus Pages: 172
Lutron Electronics Limelight LL-EXTMOUNT-H Installation preview
Limelight LL-EXTMOUNT-H
Brand: Lutron Electronics Pages: 4
Microlife IFR 100 Instructions Manual preview
IFR 100
Brand: Microlife Pages: 121
PCB Piezotronics 393B12 Installation And Operating Manual preview
393B12
Brand: PCB Piezotronics Pages: 15
Thermo Scientific AquaSensors AnalogPlus 1.0 User Manual preview
AquaSensors AnalogPlus 1.0
Brand: Thermo Scientific Pages: 24
Hartan ZX II plus Instructions Manual preview
ZX II plus
Brand: Hartan Pages: 86
J.Burrows JB21UNISTY Instruction Manual preview
JB21UNISTY
Brand: J.Burrows Pages: 4
ADT Pulse DBC835 Quick Installation Manual preview
Pulse DBC835
Brand: ADT Pages: 22
ZALMAN Z11 NEO User Manual preview
Z11 NEO
Brand: ZALMAN Pages: 10
Ikelite 6086 Canon HF G30 Quick Start - Supplemental Instructions preview
6086 Canon HF G30
Brand: Ikelite Pages: 8

Brands by name

Popular brands

Load more brands