Mitsubishi Electric 13JV28, Reference Manual

Page: 36 / 378

34
3 AnyWireASLINK
3.5 Backing up/Restoring Data of Devices Supporting iQSS
Backup folder/file
Backup data is created in the 'iQSS' folder in the root directory when backing up the data.
If no 'iQSS' folder exists when backing up the data, an 'iQSS' folder will be newly created.
Up to 100 backup folders (date_number) can be created in the 'ASLINK' folder.
Do not change a backup folder name, configuration or saved file. Otherwise, data may not be restored properly.
For the backup file capacity, refer to the following section.

Page 368 Backup File Capacity
■
Backup folder configuration
The following figure shows the backup folder configuration in an SD memory card.
■
Backup folder name
1) Date_Number
2) Start I/O number_I/O type_ID number
■
Backup file name
/ iQSS ASLINK
20141210_12 0003_ IN_ _0513
0003_ IN_ _0514
1) Backup folder
(Date_Number)
Maximum of 100
2) Backup folder
(Start I/O number_I/O
Type_ID Number)
Backup data
Root directory
ID_IN__0513.QBR
(Backup file)
SSBRINF.QBI
(System file)
Backup data
ID_IN__0514.QBR
(Backup file)
SSBRINF.QBI
(System file)
2014 12 10 12
Arbitrary number (2-digit (00 to 99) decimal)
Backup date (2-digit decimal)
Backup month (2-digit decimal)
Backup year (4-digit decimal)
0003 IN̲ 0513
ID number (4-digit decimal)
OUT or IN_ (OUT: output slave module IN_: input/combined slave module)
AnyWireASLINK master module start I/O number (4-digit hexadecimal) (A value of start I/O number divided by 16)
ID
IN_ 0513 .QBR
ID number (4-digit decimal)
OUT or IN_ (OUT: output slave module IN_: input/combined slave module)