manualshive.com logo in svg

Mitsubishi Electric 13JV28, Reference Manual

The Mitsubishi Electric 13JV28 is an exceptional product that guarantees superior performance. For a comprehensive understanding of its features and functions, you can refer to the reference manual available for free download from our website. Gain valuable insights and optimize your experience with this remarkable device.

Share
Download
background image

352

APPX
Appendix 5  Error Code List

CEE1H to 
CEE2H

System error

• Check the considerations for the performed function.
• Check the operating status and connection status of the devices 

supporting iQSS.

• Check the connection of Ethernet cable and a hub.
• Check the Ethernet line status.
• Reset the CPU module and the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF10H

System error

CF20H

• The setting value of the communication setting is out of 

the range.

• The items of communication setting which cannot be set 

on the target device supporting iQSS were set.

• The required setting items have not been set to the target 

device supporting iQSS.

Review the settings and retry.

CF30H

The parameter which is not supported by devices 
supporting iQSS was specified.

Check the version of devices supporting iQSS.

CF31H

System error

• Check the considerations for the performed function.
• Check the operating status and connection status of the devices 

supporting iQSS.

• Check the connection of Ethernet cable and a hub.
• Check the Ethernet line status.
• Reset the CPU module and the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF41H

The required information for monitoring could not be 
obtained from the devices supporting iQSS.

• Check the operating status and connection status of the devices 

supporting iQSS.

• Reset the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF50H

System error

• Check the considerations for the performed function.
• Check the operating status and connection status of the devices 

supporting iQSS.

• Check the connection of Ethernet cable and a hub.
• Check the Ethernet line status.
• Reset the CPU module and the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF51H

The function could not be performed because the other 
peripheral devices are in process.

Retry after a while.

CF52H

The required information for monitoring could not be 
obtained from the devices supporting iQSS.

• Check the operating status and connection status of the devices 

supporting iQSS.

• Reset the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF53H to 
CF56H

System error

• Check the considerations for the performed function.
• Check the operating status and connection status of the devices 

supporting iQSS.

• Check the connection of Ethernet cable and a hub.
• Check the Ethernet line status.
• Reset the CPU module and the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF60H to 
CF61H

At the data backup for the iQ Sensor Solution function (data 
backup/restoration), the process cannot be started.

• Check the operating status and connection status of the devices 

supporting iQSS.

• Reset the CPU module and the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF62H

At the data backup for the iQ Sensor Solution function (data 
backup/restoration), the process cannot be terminated.

CF63H

At the data restoration for the iQ Sensor Solution function 
(data backup/restoration), the device supporting iQSS of 
the specified backup data and the one as data restoration 
target are not inconsistent.

Check the devices supporting iQSS (manufacturer, model name, version) of 
the specified backup data and the restoration target.

CF64H

At the data restoration for the iQ Sensor Solution function 
(data backup/restoration), the process cannot be started.

• Check the operating status and connection status of the devices 

supporting iQSS.

• Reset the CPU module and the devices supporting iQSS and retry.

If the problem persists, contact the manufacturer of the devices supporting 
iQSS.

CF65H

At the data restoration for the iQ Sensor Solution function 
(data backup/restoration), the process cannot be 
terminated.

Error code

Error and cause

Corrective action

Summary of Contents for 13JV28



























































































































































































































































































































































































Reviews:

No comments

Related manuals for 13JV28

Young Living Duet Operating Manual preview
Duet
Brand: Young Living Pages: 32
Valor G3 Series Installation Instructions preview
G3 Series
Brand: Valor Pages: 4
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Vega VEGAPULS 62 Specification Sheet preview
VEGAPULS 62
Brand: Vega Pages: 2
Vega DP-1 User Manual preview
DP-1
Brand: Vega Pages: 11
Vello CB-300 Manual preview
CB-300
Brand: Vello Pages: 8
daviteq CAP10 Manual preview
CAP10
Brand: daviteq Pages: 33
LumiSource A44 sound rocker Owner'S Manual preview
A44 sound rocker
Brand: LumiSource Pages: 8
FujiFilm FJ-5120LV Operating Instruction preview
FJ-5120LV
Brand: FujiFilm Pages: 13
Scame electrical solutions OPTIMA-EX 125A Installation, Use And Maintenance Manual preview
OPTIMA-EX 125A
Brand: Scame electrical solutions Pages: 8
Yakima K831 Manual preview
K831
Brand: Yakima Pages: 8
agno's Jumbo MultiBigShoot Quick Manual preview
Jumbo MultiBigShoot
Brand: agno's Pages: 2
Marantz Mount 12 Installation Instructions preview
Mount 12
Brand: Marantz Pages: 2
Ikelite 2601.03 Instruction preview
2601.03
Brand: Ikelite Pages: 2
Acebil PE-82MX Operation Manual preview
PE-82MX
Brand: Acebil Pages: 11
CYBEX 2.GO User Manual preview
2.GO
Brand: CYBEX Pages: 24
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4

Brands by name

Popular brands

Load more brands