Mitsubishi Electric 13JV28, Reference Manual

Page: 68 / 378

66
4 CC-Link
4.4 Monitoring Devices Supporting iQSS
4.4
Monitoring Devices Supporting iQSS
The connection statuses of devices supporting iQSS can be monitored.
Operating procedure
Sensor/device monitor reads a large volume of information from a CPU module at once.
Therefore, the processing speed of the sensor/device monitor function may decrease depending on the set
communication route.
1.
Select [Diagnostics]  [Sensor/Device Monitor] with an
engineering tool.
2.
Select a CC-Link master/local module in the "Module
Selection (Sensor/Device Monitor)" screen, and click the [OK]
button.
3.
Read the message and select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox, then click the [Yes] button.
In any of the following cases, select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox.
• The automatic detection function of connected devices is used
for the first time.
• The CPU module was reset or turned OFF.
• The actual system configuration was changed.
The "Sensor/Device Monitor for CC-Link" screen appears.
4.
Select a target device supporting iQSS to be monitored in
'List of stations' or 'Device map area' in the "Sensor/Device
Monitor for CC-Link" screen.
The status of the selected device supporting iQSS is displayed in
the "Monitoring Information" window.
1. Select
2. Select
3. Click
1. Check
2. Click
List of stations
Device map area
Monitoring Information
window
Select