manualshive.com logo in svg

Mitsubishi Electric 13JV28, Reference Manual

The Mitsubishi Electric 13JV28 is an exceptional product that guarantees superior performance. For a comprehensive understanding of its features and functions, you can refer to the reference manual available for free download from our website. Gain valuable insights and optimize your experience with this remarkable device.

Share
Download
background image

APPX

Appendix 6  Special Relay (SM)/Special Register (SD) List

357

A

MELSEC iQ-R series

The following table lists the special relays (SM) used for MELSEC iQ-R series.

Number

Name

Description

Details

Set by
(setting 
timing)

SM606

SD memory card forced 
disable instruction

OFF: Cancel instruction
ON: Forced disable 

instruction

When this relay is turned ON, the instruction that forcibly disables an 
SD memory card is issued. If any function accesses the SD memory 
card, the disabling process does not start until the access is completed.
When this relay is turned OFF, the instruction that forcibly disables an 
SD memory card is issued.

U

SM1360

iQ Sensor Solution 
backup/restoration 
right-to-use request

OFF to ON: Backup/

restoration right to use 
requested

ON to OFF: Backup/

restoration right to use 
acquired/released

This relay requests acquiring/releasing a right to use for iQ Sensor 
Solution backup/restoration.
At the timing when this relay turns OFF to ON, the relay requests a right 
to use with the value specified to SD1360.
This relay turns OFF when a right to use is acquired/released.

S (status 
change)/U

SM1361

iQ Sensor Solution 
backup request

OFF to ON: Backup 

requested

ON to OFF: Backup 

complete

This relay requests iQ Sensor Solution data backup.
At the timing when this relay turns OFF to ON, the backup for the set 
device(s) is performed.
This relay turns OFF when iQ Sensor Solution data backup is complete.
This relay turns ON to OFF when a right to use is acquired.

S (status 
change)/U

SM1362

iQ Sensor Solution 
backup normal 
completion

OFF: Other than normal 

completion

ON: Backup complete 

normally

This relay turns ON when the iQ Sensor Solution data backup is 
complete normally.
When iQ Sensor Solution data backup is compete with an error, 
SM1363 turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or backup is 
requested.

S (status 
change)

SM1363

iQ Sensor Solution 
backup abnormal 
completion

OFF: Other than error 

completion

ON: Backup completed with 

error(s)

This relay turns ON when iQ Sensor Solution data backup is complete 
with an error. The error code is stored to SD1376 or SD1377.
When iQ Sensor Solution data backup is compete normally, SM1362 
turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or backup is 
requested.

S (status 
change)

SM1364

iQ Sensor Solution 
restoration request

OFF to ON: Restoration 

requested

ON to OFF: Restoration 

complete

This relay requests the iQ Sensor Solution data restoration.
At the timing when this relay turns OFF to ON, the restoration for the set 
device(s) is performed.
This relay turns OFF when iQ Sensor Solution data restoration is 
complete.
This relay turns ON to OFF when a right to use is acquired.

S (status 
change)/U

SM1365

iQ Sensor Solution 
restoration normal 
completion

OFF: Restoration is 

complete abnormally

ON: Restoration complete 

normally

This relay turns ON when iQ Sensor Solution data restoration is 
complete normally.
When iQ Sensor Solution data restoration is complete with an error, 
SM1366 turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or a 
restoration is requested.

S (status 
change)

SM1366

iQ Sensor Solution 
restoration abnormal 
completion

OFF: Other than error 

completion

ON: Restoration completed 

with error(s)

This relay turns ON when iQ Sensor Solution data restoration is 
complete with an error. The error code is stored to SD1376 or SD1377.
When iQ Sensor Solution data restoration is complete normally, 
SM1365 turns ON and this relay remains OFF.
This relay turns ON to OFF when a right to use is acquired or a 
restoration is requested.

S (status 
change)

SM1367

iQ Sensor Solution 
backup/restoration 
cancellation request

OFF to ON: Backup/

restoration 
cancellation requested

ON to OFF: Backup/

restoration 
cancellation complete

This relay requests the cancellation of iQ Sensor Solution backup/
restoration.
At the timing when this relay turns OFF to ON, iQ Sensor Solution 
backup/restoration is cancelled.
This relay turns OFF when the cancellation of iQ Sensor Solution 
backup/restoration is complete.
This relay turns ON to OFF when a right to use is acquired or a backup/
restoration is requested.

S (status 
change)/U

Summary of Contents for 13JV28



























































































































































































































































































































































































Reviews:

No comments

Related manuals for 13JV28

KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Monacor AXDA-104HD Instructions preview
AXDA-104HD
Brand: Monacor Pages: 2
K&M 19784 Information For Use preview
19784
Brand: K&M Pages: 6
K&K Sound Bass Master Rockabilly Product Manual preview
Bass Master Rockabilly
Brand: K&K Sound Pages: 2
SAGEMCOM Fast PLUG 500 premium Quick Installation Manual preview
Fast PLUG 500 premium
Brand: SAGEMCOM Pages: 2
ZEPP HEAD Handbook preview
HEAD
Brand: ZEPP Pages: 36
SAF-HOLLAND FleetMaster Air FW8 Series Owner'S Manual preview
FleetMaster Air FW8 Series
Brand: SAF-HOLLAND Pages: 20
Balluff IO-Link BAE SA-CS-027-YI-BP00,3 GS04 User Manual preview
IO-Link BAE SA-CS-027-YI-BP00,3 GS04
Brand: Balluff Pages: 50
Yakima K831 Manual preview
K831
Brand: Yakima Pages: 8
Waycon SX300 Series Manual preview
SX300 Series
Brand: Waycon Pages: 27
Cheyenne CB5250401 Instructions For Use Manual preview
CB5250401
Brand: Cheyenne Pages: 348
Tobii Pro Pro Spectrum User Manual preview
Pro Spectrum
Brand: Tobii Pro Pages: 34
YOKOGAWA SC25V Instruction Manual preview
SC25V
Brand: YOKOGAWA Pages: 28
Carlson BRx6 Calibration preview
BRx6
Brand: Carlson Pages: 11
Kogan SMARTERHOME KASMDBL2PGA User Manual preview
SMARTERHOME KASMDBL2PGA
Brand: Kogan Pages: 24
FixPosition NAV-RTK Operation Manual preview
NAV-RTK
Brand: FixPosition Pages: 8
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40

Brands by name

Popular brands

Load more brands