Mitsubishi Electric 13JV28, Reference Manual

Page: 58 / 378

56
4 CC-Link
4.1 Detecting Devices Supporting iQSS Automatically
4.1
Detecting Devices Supporting iQSS Automatically
A slave station connected to a CC-Link master/local module can be detected and the information can be displayed in the "CC-
Link Configuration" window.
For the creation method of a new project and the operation methods of the "CC-Link Configuration" window, refer to the
following manual.

GX Works2 Version 1 Operating Manual (Common)
Operating procedure
1.
Create a new project in an engineering tool.
2.
Select "Parameter"  "Network Parameter"  "CC-Link" on
the Project view.
3.
Select and enter necessary parameters on the "Network
Parameter - CC-Link Module Configuration" screen.
Check that "Read Model Name of Slave Station" is
selected on the "Operation Setting" screen.
 Page 54 Checking if "Read Model Name of
Slave Station" is selected
4.
Select "Set the station information in the "CC-Link
configuration" window".
5.
Read the message and click the [Yes] button.
The [Station Information] button of "Station Information Setting" is
changed to [CC-Link Configuration Setting] button.
6.
Click the [CC-Link Configuration Setting] button.
Select
1. Select 4. Check
3. Click
2.Enter
Click