Mitel 6867i Premium, Administrator'S Manual

Page: 526 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-265
Configuring Interoperability with an LDAP Directory
Use the following parameters to configure interoperability with an LDAP Directory
For specific parameters you can set in the configuration files, see Appendix A,
“Basic LDAP
Settings”
on
page A-140
and
“Advanced LDAP Settings”
on
page A-143
GENERAL DIRECTORY OPTIONS
Enabling/Disabling the Directory
You can enable and disable user access to the Directory List on the IP phones by defining
“
directory disabled
” parameter in the configuration files. Valid values for this parameter are
0
(enabled) and
1
(disabled). If this parameter is set to
0
, the Directory List can be accessed by
all users. If this parameter is set to
1
, the Directory List does not display on the IP phone and
the Directory key is disabled.
Enabling/Disabling the Directory Using the Configuration Files
Use the following procedures to enable/disable the Directory List on the IP phones.
For specific parameters you can set in the configuration files for enabling/disabling the Directory
List, see Appendix A, the section,
“Enhanced Directory Settings”
on
page A-126
.
Display and Sorting
Administrators and users can configure the directory entries to display using the contact’s first
name and then last name or vice versa. Moreover, the option to sort contacts using either their
first name or last name is available. These stings can be configured by defining the “
directory
display name order
” and “
directory sort preference
” parameters in the configuration files or
by navigating to the
Directory
options menu on the 6863i and 6865i, or the
Directory > Settings
options menu on the 6867i, 6869i, and 6873i.
Configuring Directory Display and Sorting Options Using the Configuration Files
Use the following procedures to configure display and sorting options for the Directory.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“General Directory Settings”
on
page A-153
.
CONFIGURATION FILES
CONFIGURATION FILES
CONFIGURATION FILES