Mitel 6867i Premium, Administrator'S Manual, Page: 411 / 1042

Operational Features
5-150
To enable/disable an operational state, click the "
Idle
", "
Connected
", "
Incoming
", or "
Out-
going
" fields to check or uncheck the box.
8.
Click
Save Settings
to save your changes.
For Programmable Keys:
9.
In the “
Hard Key
” field, select the programmable key type you want to configure.
In the "
Value
" field, enter a value to associate with the programmable key. For example,
for a Speeddial value, you can enter a number you want to use for the Speeddial key, or
12345+ as a Speeddial prefix.
10.
In the "
Line
" field, select the line for which you want to associate the programmable key.
11.
Click
Save Settings
to save your changes.
CONFIGURABLE POSITIONING OF PROGRAMMED SOFTKEYS
By default, when programming softkeys for the 6867i, 6869i, and 6873i IP phones, the softkey
is automatically placed (i.e. collapses) into the first available softkey slot/position on the LCD
display. For example, for the 6867i, if top softkeys 1 through 44 are set to ”None” on and top
softkey 3 is programmed as a speeddial softkey with the label “Home”, after saving the settings,
the “Home” speeddial softkey will appear on the first top softkey position on the LCD display.
Administrators now have the option to configure programmed softkey positioning behavior.
Enabling the “
collapsed softkey screen
” parameter (i.e. defining the parameter as “
1
” in the
configuration files) will maintain the previous behavior (as per the example above) for the 6867i
6869i, and 6873i. Disabling the parameter (i.e. defining the parameter as “
0
”) will cause the IP
Note:
Operational states are not applicable to expansion modules.
Note:
For available type values on each IP phone model, see Appendix A, the
section,
“Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key
Parameters”
on
page A-217
.
Note:
Applicable to the 6867i, 6869i, and 6873i IP Phones only.
6867i Example - Collapsed Mode (Default)