Mitel 6867i Premium, Administrator'S Manual, Page: 132 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
3-62
Autodial Settings
You can configure the following Autodial settings.
N/A Packetization
Interval “sip customized
codec” attribute Packetization interval (ptime) is a
measurement of the duration of PCM data
within each RTP packet sent to the
destination, and hence defines how much
network bandwidth is used for transfer of
the RTP stream. Enter the ptime values for
the customized Codec list in milliseconds.
For more information, see Chapter 4,
“Real-time Transport Protocol (RTP)
Settings”
on page 4-83 .
N/A Silence
Suppression sip silence
suppression Silence suppression is enabled by default
on the IP phones. The phone negotiates
whether or not to use silence suppression.
Disabling this feature forces the phone to
ignore any negotiated value.
For more information, see Chapter 4,
“Real-time Transport Protocol (RTP)
Settings”
on page 4-83 .
PARAMETER
IN
IP PHONE UI PARAMETER IN
MITEL WEB UI PARAMETERS IN
CONFIGURATION
FILES DESCRIPTION
N/A Autodial Number
(Global and
Per-Line)
sip autodial number
sip lineN autodial
number
Globally or on a per-line basis, specifies the
SIP phone number that the IP phone
autodials when the handset is lifted from
the phone cradle. An empty (blank) value
disables autodial on the phone.
For more information, see Chapter 4,
“Autodial Settings” on page 4-96 .
PARAMETER
IN
IP PHONE UI PARAMETER IN
MITEL WEB UI PARAMETERS IN
CONFIGURATION
FILES DESCRIPTION