Mitel 6867i Premium, Administrator'S Manual

Page: 484 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-223
2.
Choose an available key that you want to use as a retrieve key and in the
Type
field, select
BLF/Xfer
.
3.
(If available) In the
Label
field, enter a label to apply to this key (e.g. Pickup).
4.
In the
Value
field, enter "myCalls".
5.
Choose an available key that you want to use as park key and in the
Type
field, select
BLF/Xfer
.
6.
(If available) In the
Label
field, enter a label to apply to this key (e.g. Park).
7.
In the
Value
field, enter "callPark".
8.
Click
Save Settings
.
USING THE PARK CALL/PICKUP PARKED CALL FEATURE
Use the following procedures on the IP phones to park a call and pick up a parked call.
Parking a Call
1.
While on a live call, press the "
Park
" softkey.
2.
Perform the following for your specific server:
If the call is parked successfully, the response is either a greeting voice confirming that the
call was parked, or a hang up occurs.
3.
If the call fails, you can pick up the call (using the next procedure) and press the "
Park
"
softkey again to retry step 2.
IP PHONE UI
ASTERISK:
Server announces the extension number where the call has been parked.
Once the call is parked, press the
Goodbye
key to complete parking.
BROADWORKS:
After you hear the greeting from the CallPark server, enter the extension
where you want to park the call.
SYLANTRO:
Enter the extension number where you want to park the call, followed by
"
#
" key.
NIN PBX:
Enter the extension number where you want to park the call, followed by
"
#
" key.
MICLOUD TELEPO:
Not applicable to the MiCloud Telepo call park method.