Mitel 6867i Premium, Administrator'S Manual

Page: 294 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-33
• Auto (Default)
6.
If you select “
Off
”, press
Done
to save your setting.
7.
If you select “
Auto
”, press the
Advanced
softkey to set the automatic timer.
8.
Using the keypad, enter the amount of seconds you want the phone to stay backlit when
the phone is idle. Valid values are
1
to
36000
seconds. Default is
600 seconds
(equals 10
minutes). When this period of time is reached, the phone turns OFF the backlight. Use the
"
Backspace
" and/or "
Clear
" softkeys to delete entries if required.
9.
Press
Done
to save your setting. The setting applies immediately to the phone.
DISPLAY
The
Display
option on the 6867i, 6869i, and 6873i IP phones allows you to set the following
on your phone:
• Brightness Level
• Brightness Timer
BRIGHTNESS LEVEL
The "
Brightness Level
" option allows you to set the amount of light that illuminates the LCD
display. Use this option to set your preference of brightness.
SETTING BRIGHTNESS
For the 6867i/6869i:
1.
Press to enter the Options List.
2.
Navigate to the
Display
option and press the button or Select softkey.
3.
Press the
2
key to navigate to the
Brightness Level
setting.
4.
Use the
3
and
4
navigation buttons to increase or decrease the intensity of brightness on
the LCD.
5.
Press the
Save
softkey to save your changes.
Note:
Setting the Backlight to “
Auto
” displays an
ADVANCED
button for you to set
the Auto timer.
Note:
Applicable to the 6867i, 6869i, and 6873i IP Phones only.
IP PHONE UI