Mitel 6867i Premium Administrator'S Manual Download Page 210

Page: 210 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

4-57

Configuring NTP Servers (optional)

Use the following procedure to enable/disable and configure the NTP servers using the
configuration files.

For specific parameters you can set in the configuration files, see Appendix A, the section,

“Time Server Settings”

page A-51.

Use the following procedure to enable/disable the NTP server using the IP Phone UI.

For the 6863i/6865i:

Press

on the phone to enter the Options List.

Select

Preferences.

Select

Time and Date.

Select

Timer Server 1

Timer Server 2

, or

Time Server 3

Enter the IP Address (in dotted decimal) or qualified domain name for the Time Server.

Press

Done

to save the change.

For the 6867i/6869i:

Press

on the phone to enter the Options List.

Select

Time and Date > Set Date and Time

In the

Timer Server 1, Time Server 2,

and/or

Time Server 3

fields, enter the respective

IP address (in dotted decimal) or qualified domain name.

Press the

Save

softkey.

For the 6873i:

Press

on the phone to enter the Options List.

Press the

Time and Date

icon.

Press the

Set Date and Time

icon.

In the

Timer Server 1, Time Server 2,

and/or

Time Server 3

fields, enter the respective

IP address (in dotted decimal) or qualified domain name.

Press the

Save

softkey.

CONFIGURATION FILES

IP PHONE UI

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands

Mitel 6867i Premium, Administrator'S Manual

Search results

Summary of Contents for 6867i Premium

Reviews:

Related manuals for 6867i Premium

Brands by name

Popular brands