manualshive.com logo in svg

Mitel 6867i Premium, Administrator'S Manual, Page: 185 / 1042

Share
Download
Mitel 6867i Premium Administrator'S Manual Download Page 185

Network Settings

4-32

Configuring SIP and TLS Source Ports Using the Mitel Web UI

Use the following procedure to configure SIP and TLS source ports using the Mitel Web UI.

1.

Click on 

Advanced Settings->Global SIP->Advanced SIP Settings.

2.

The “

Local SIP UDP/TCP Port

” field has a default value of 

5060

. Change this value if 

required to a value greater than 1024 and less than 65535.

3.

The “

Local SIP TLS Port

” field has a default value of 

5061

. Change this value if required 

to a value greater than 1024 and less than 65535.

4.

Click 

Save Settings

 to save your changes.

 MITEL WEB UI

Note: 

It is recommended that you avoid the conflict RTP port range in case of a 

UDP transport.

Note: 

It is recommended that you avoid the conflict with any TCP ports being used. 

For example: WebUI HTTP server on 80/tcp and HTTPS on 443/tcp.

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments