Mitel 6867i Premium, Administrator'S Manual

Page: 874 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
A-176
STATUS CODE ON IGNORING INCOMING CALLS
SWITCH FOCUS TO RINGING LINE
CALL HOLD REMINDER SETTINGS
PARAMETER –
sip ignore status code
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the status code that is sent in the response to the server
when a user ignores an incoming call.
FORMAT
Integer
DEFAULT VALUE
486
RANGE
Valid SIP final negative response code (Refer to RFC3261)
EXAMPLE
sip ignore status code: 486
PARAMETER –
switch focus to ringing line
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies whether or not the UI focus is switched to a ringing line
while the phone is in the connected state.
FORMAT
Boolean
DEFAULT VALUE
1 (enable)
RANGE
0 (disable)
1 (enable)
EXAMPLE
switch focus to ringing line: 1
PARAMETER –
call hold reminder
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Enables or disables the reminder ring splash timer to start as soon
as you put a call on hold (even when no other calls are active on the
phone). When enabled, the phone initiates a reminder ring splash
periodically for the single call on hold. When disabled, no reminder
ring splash is audible.
FORMAT
Boolean
DEFAULT VALUE
0
RANGE
0 (disable)
1 (enable)
EXAMPLE
call hold reminder: 1