Mitel 6867i Premium, Administrator'S Manual, Page: 368 / 1042

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
5-107
• If a user is in a dialing state with the “
Allow Barge-In
” parameter enabled and a page is
received by the phone, the phone will automatically switch focus to the page screen.
• If a user is in a dialing state with the “
Allow Barge-In
” parameter disabled and a page is
received by the phone, the phone will keep its focus on the dialing screen.
CONFIGURING GROUP PAGING RTP SETTINGS
Use the following procedure to configure Group Paging RTP Settings using the configuration
files.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Codec Negotiation Behavior”
on
page A-207
.
Use the following procedure to configure RTP streaming for Paging applications using the Mitel
Web UI
.
1.
Click on
Basic Settings->Preferences->Group Paging RTP Settings
.
2.
In the “
Paging Listen Addresses
” text box, enter the multicast IP address(es) and port
number(s) on which the phone listens for incoming multicast RTP packets.
3.
Click on
Softkeys and XML.
or
Click on
Programmable Keys
.
or
Click on
Expansion Module Keys
.
4.
Choose a key that you want to assign as the Paging Key and select
Paging
from the “
Type
”
field.
CONFIGURATION FILES
MITEL WEB UI
Notes:
1.
Enter the IP address in dotted decimal format (for example,
224.0.0.2:10000,239.0.1.20:15000
) If this field is blank, Paging listening
capability is disabled on the phone.
2.
The valid port range is from 1 to 65535.