Mitel 6867i Premium, Administrator'S Manual

Page: 251 / 1042

Global SIP Settings
4-98
2.
In the “
Autodial Number
” field, specify the SIP number that the IP phone dials whenever
the IP phone is off-hook. An empty (blank) value disables autodial on the phone.
For example:
8500
3.
In the
“Autodial Timeout”
field, specify a value, in seconds, for the timer as follows:
• If you want the IP phone to autodial the number immediately (hotline) whenever the IP
phone is off-hook, accept the default value of
0.
• If you want to specify a length of time for the IP phone to wait before dialing the number,
enter the length of time (in seconds). For example:
30
Valid values are 0 to 120.
4.
Click
Save Settings
to save your changes.
Per-Line Configuration:
1.
Click on
Advanced Settings->Line N ->Autodial Settings.
2.
Perform one of the following actions:
• To allow this line to use the global autodial settings, click on the
Use Global Settings
parameter to enable it, then click
Save Settings
to save your changes.
• To specify a different autodial configuration for this specific line, disable the
Use Global
Settings
parameter. Then proceed to step 3.
3.
In the “
Autodial Number
” field, specify the SIP number for this line that the IP phone dials
whenever the IP phone is off-hook as follows:
• If set to -1, then the global autodial settings for this IP phone to this line.
• If set to empty (blank), then disable Autodial on this line.
• If set to a valid SIP number, dial the SIP number specified for this line. For example:
8500
4.
In the
“Autodial Timeout”
field, specify a value, in seconds, for the timer for this line as
follows:
• If you want the IP phone to autodial the number immediately (hotline) whenever the IP
phone is off-hook, accept the default value of
0.
• If you want to specify a length of time for the IP phone to wait before dialing the number,
enter the length of time (in seconds). For example:
30
Valid values are 0 to 120.
5.
Click
Save Settings
to save your changes.