manualshive.com logo in svg

Mitel 6867i Premium, Administrator'S Manual, Page: 630 / 1042

Share
Download
Mitel 6867i Premium Administrator'S Manual Download Page 630

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

6-52

Moreover, the phone will, by default, play a periodic audible beep tone through the selected 
audio path notifying users that their call is being recorded. Playback of the beep tone is 
configurable and if required, administrators can disable or set the playback interval of the beep 
tone by defining the “

recording periodic beep

” parameter in the configuration files. 

Additionally, by utilizing the “

recording beep direction

“ parameter, administrators can define 

whether the beep tone is audible locally, remotely, or both.

WARNING:THE RECORDING ICON IS DISPLAYED ON THE IP PHONES TO 
INDICATE THE RECORDING SESSION IS ACTIVE AND THAT A DUPLICATE 
COPY OF THE RTP/SRTP STREAM IS TO BE SENT FROM THE PHONE TO THE 
RECORDING SERVER.  THE OVERALL RECORDING AND ITS QUALITY IS 
DEPENDENT ON THE RECORDING SERVER AND THE NETWORK.

Note: 

In addition to the aforementioned parameters corresponding to the active IP voice 

recording feature, the transport protocol parameters for SIP services (i.e. “

sip services 

transport protocol

” and “

sip services port

”) must also be defined in the configuration 

files. See 

“Configurable Transport Protocol for SIP Services and RTCP Summary 

Reports”

 on 

page 6-48

 for more information.

6869i

6873i

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments