Mitel 6867i Premium Administrator'S Manual Download Page 301

Page: 301 / 1042

Operational Features

5-40

SCREEN SAVER

A screen saver displaying the date and time and the number of missed calls (if applicable) is

displayed for the 6867i, 6869i, and 6873i IP phones after a specified amount of inactivity.

The amount of time the phone must be idle before the screen saver initiates is configurable
through the phone’s UI or by defining the “

screen save time

” parameter in the configuration

files.

CONFIGURING THE SCREEN SAVER TIMER USING THE CONFIGURATI-
ON FILES

Use the following parameter to configure the screen saver timer.

For specific parameters you can set in the configuration files, see Appendix A, the section,

“Screen Saver Settings”

page A-63

Note:

Applicable to the 6867i, 6869i, and 6873i IP Phones only.

Note:

If there are no missed calls, only the date and time are displayed.

CONFIGURATION FILES

Summary of Contents for 6867i Premium



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6867i Premium

Reviews:

Mitel 6867i Premium, Administrator'S Manual, Page: 301 / 1042

Search results

Summary of Contents for 6867i Premium

Reviews: